Defensive programming

Last updated on 2024-07-25 | Edit this page

Overview

Questions

  • How can I make my programs more reliable?

Objectives

  • Signal errors by raising exceptions.
  • Use try-except blocks to catch and handle exceptions.
  • Explain what an assertion is.
  • Add assertions that check the program’s state is correct.
  • Use a logging framework to report on program activity.
  • Identify sources of more advanced lessons on code testing.

Scientist’s nightmare

If you needed any motivation to learn and employ the principles of defensive programming, look no further than this article. It documents the experience of a researcher who had to retract five published papers - three of which were in Science - because his code had inadvertently switched the rows and columns of a data table.

Now that we’ve written plot_precipitation_climatology.py, how can we be sure that it’s producing reliable results?

The first step toward getting the right answers from our programs is to assume that mistakes will happen and to guard against them. This is called defensive programming, and there are a number of tools and approaches at our disposal for doing this. Broadly speaking, we can raise and handle errors to check and respond to program inputs, use assertions to make sure nothing crazy or unexpected has happened, write unit tests to make sure each component of our program produces expected outputs, and use a logging framework to report on program activity. In this lesson, we’ll look at how error handling, assertions and logging can make the unit conversion in our program more reliable, and we’ll provide links to further information on unit .

Types of errors


There are essentially two kinds of errors that can arise in Python: syntax errors and exceptions. You’re probably familiar with the former:

PYTHON

rainfall = 5
if rainfall > 10
    print("heavy rainfall")

ERROR

    if rainfall > 10
                    ^
SyntaxError: expected ':'

Once a statement or expression is syntactically correct, it may cause an error when an attempt is made to execute it. Errors detected during execution are called exceptions (i.e. an exception from normal behaviour) and there are lots of different types of exceptions:

PYTHON

10 * (1/0)

ERROR

ZeroDivisionError: division by zero

PYTHON

4 + spam*3

ERROR

NameError: name 'spam' is not defined

PYTHON

"2" + 2

ERROR

TypeError: can only concatenate str (not "int") to str

Raising errors


With respect to defensive programming, it can sometimes be useful to raise your own exceptions (using the raise keyword).

PYTHON

infile = "temperature_data.txt"
file_format = infile.split(".")[-1]
if file_format != "nc":
    raise ValueError(f"{infile} does not have the netCDF file extension .nc")

ERROR

ValueError                                Traceback (most recent call last)
/var/folders/6v/vrpsky6j509dff7250jyg8240000gp/T/ipykernel_12425/3612736507.py in <module>
      2 file_format = infile.split(".")[-1]
      3 if file_format != "nc":
----> 4     raise ValueError(f"{infile} does not have the netCDF file extension .nc")

ValueError: temperature_data.txt does not have the netCDF file extension .nc

In this case we’ve chosen to raise a ValueError, but we could pick any of the builtin exception types (including just a generic Exception) or define our own custom exception class.

In the context of our plot_precipitation_climatology.py script, we currently multiply our data by 86400 regardless of what the input units are. It would be better if we modified the main function so that the program multiplied by 86400 if the input units are kg m-2 s-1, performed no unit conversion if the input units are mm/day, or halted with an informative error message if the input data have some other units.

PYTHON

input_units = clim.attrs["units"]
if input_units == "kg m-2 s-1":
    clim = convert_pr_units(clim)
elif input_units == "mm/day":
    pass
else:
    raise ValueError("""Input units are not 'kg m-2 s-1' or 'mm/day'""")

Handling errors


As we’ve seen in the examples above, if exceptions aren’t dealt with the program crashes. The error message upon crashing is sometimes be easy to understand (particularly if you wrote the raise statement yourself) but can often be cryptic.

If we’d rather the program didn’t crash when a particular exception occurs, we can use a try-except block to catch and handle the exception. The syntax of the try-except block is:

PYTHON

try:
    <do something>
except Exception:
    <handle the error>

The code in the except block is only executed if an exception occurred in the try block. The except block is required with a try block, even if it contains only the pass statement (i.e. ignore the exception and carry on). For example, let’s say there’s a calculation in our program where we need to divide by the number of available weather stations. If there were no weather stations available, by default the program would crash.

PYTHON

quantity = 500
n_stations = 0

scaled_quantity = quantity / n_stations
print(scaled_quantity)

ERROR

ZeroDivisionError                         Traceback (most recent call last)
/var/folders/6v/vrpsky6j509dff7250jyg8240000gp/T/ipykernel_12425/3927438267.py in <module>
      2 n_stations = 0
      3
----> 4 scaled_quantity = quantity / n_stations
      5 print(scaled_quantity)

ZeroDivisionError: division by zero

If we’d prefer the program simply continue with a scaled_quantity value of NaN, we could catch and handle the ZeroDivisionError.

PYTHON

import numpy as np


quantity = 500
n_stations = 0

try:
    scaled_quantity = quantity / n_stations
except ZeroDivisionError:
    scaled_quantity = np.nan

print(scaled_quantity)

OUTPUT

nan

In the context of our plot_precipitation_climatology.py script, the variable attributes from the input netCDF file are stored in a dictionary that we access via clim.attrs. The dictionary keys are the names of the variable attributes (e.g. standard_name, long_name, units) and the dictionary values are the values corresponding to those keys (e.g. precipitation_flux, Precipitation, kg m-2 s-1). If the input data file didn’t have a units attribute associated with the precipitation variable, our program would currently fail with a KeyError (which Python raises when you ask for a key that isn’t in a dictionary).

PYTHON

example_dict = {
    "standard_name": "precipitation_flux",
    "long_name": "Precipitation",
}
units = example_dict["units"]

ERROR

KeyError                                  Traceback (most recent call last)
/var/folders/6v/vrpsky6j509dff7250jyg8240000gp/T/ipykernel_12425/2679443625.py in <module>
      1 example_dict = {
      2     "standard_name": "precipitation_flux",
      3     "long_name": "Precipitation",
      4 }
----> 5 units = example_dict["units"]

KeyError: 'units'

It’s fine that our program would crash in this situation (we can’t continue if we don’t know the units of the input data), but the error message doesn’t explicitly tell the user that the input file requires a units attribute. To make this crystal clear, we could use a try-except block in the main function to catch the KeyError and re-define a better error message.

PYTHON

try:
    input_units = clim.attrs["units"]
except KeyError:
    raise KeyError(f"Precipitation variable in {inargs.pr_file} does not have a units attribute")

Assertions


Unexpected behaviour in a program can sometimes propagate a long way before triggering an exception or producing a perplexing result. For instance, if a calculation produces a non-physical value for precipitation (e.g. a negative value) that value could be used in various downstream calculations of drought and fire risk (combined with values for temperature, wind, humidity, etc). The final plot of the forest fire danger index might look wrong (or not, which would be even worse) to the scientist who wrote and executed the code, but it wouldn’t be immediately obvious that the precipitation calculation was the source of the problem.

In order to avoid propagation, it’s best to nip unexpected behaviour in the bud right when it occurs. One way to do this is to add assertions to your code. An assertion is simply a statement that something must be true at a certain point in a program. When Python sees one, it evaluates the assertion’s condition. If it’s true, Python does nothing, but if it’s false, Python halts the program immediately and raises an AssertionError with a custom error message.

To demonstrate an assertion in action, consider this piece of code that halts if any precipitation data is negative:

PYTHON

import numpy as np

pr_data = np.array([1.5, 2.3, 0.7, -0.2, 4.4])
assert pr_data.min() >= 0.0, "There is at least one negative precipitation value"

ERROR

---------------------------------------------------------------------------
AssertionError                            Traceback (most recent call last)
<ipython-input-19-33d87ea29ae4> in <module>()
----> 1 assert pr_data.min() >= 0.0, "There is at least one negative precipitation value"

AssertionError: There is at least one negative precipitation value

With respect to our command line program, one thing to check would be that the climatological precipitation values lie within a sensible range after the unit conversion. The world record highest daily rainfall total is 1825mm (at Reunion Island in 1966), so climatological values across the globe should be more than 0 but less than 2000 mm/day. We could add the following assertions to our convert_pr_units function to catch unexpected precipitation values.

PYTHON

assert darray.data.min() >= 0.0, "There is at least one negative precipitation value"
assert darray.data.max() < 2000, "There is a precipitation value/s > 2000 mm/day"

Assertions are also used in unit testing (each test culminates in an assertion), but that topic is beyond the scope of this lesson.

Testing and continuous integration

An assertion checks that something is true at a particular point in the program. For programs that are more complex (or research critical) than plot_precipitation_climatology.py, it’s a good idea to take the next step and check the overall behavior of entire pieces (or units) of code. Related concepts like unit testing and continuous integration are beyond the scope of this lesson, but Research Software Engineering With Python has a chapter on testing that is well worth a read.

Logging


So far we’ve considered how to make our programs halt or handle the situation when things go wrong. Another option in our defensive programming toolkit is to have our programs report their own activity.

For example, let’s say we’re working with relative humidity data. We wouldn’t typically expect to encounter any values over 100%, but it is physically possible. Rather than halt the program if a value over 100% occurs, we might therefore want our program to simply report the maximum relative humidity. We can then decide whether to trust the output or not (e.g. a value of 100.1% might be ok but not 150%).

To do this reporting, our first instinct might be to add a print statement to the program.

PYTHON

rh_data = np.array([1.5, 20.4, 100.1, 76.3, 54.4])
rh_max = rh_data.max()
print(f"The maximum relative humidity was {rh_max}%")

OUTPUT

The maximum relative humidity was 100.1%

The problem with this approach is that information printed to the screen is lost once we close our command line session. Constantly adding, removing or commenting out print statements is also tedious and error-prone.

A better approach is to use a logging framework, such as Python’s logging library. This lets us leave debugging statements in our code and turn them on or off at will. Let’s start by replacing our print statement with a logging command.

PYTHON

import logging

rh_data = np.array([1.5, 20.4, 100.1, 76.3, 54.4])
rh_max = rh_data.max()
logging.debug(f"The maximum relative humidity was {rh_max}%")

Whoops! There’s no output because by default the logging library only reports information at the “warning” level and above. In order of increasing severity, the available levels are:

  • debug: very detailed information used for localizing errors.
  • info: confirmation that things are working as expected.
  • warning: something unexpected happened, but the program will keep going.
  • error: something has gone badly wrong, but the program hasn’t hurt anything.
  • critical: potential loss of data, security breach, etc.

If we want to see the output from less severe levels (i.e. turn our debugging statements on), we’d need to change the minimum level in the logging configuration. We can also provide the name of a file to write the logging information to, so that it isn’t lost when we finish our command line session.

PYTHON

# for loop only required in notebooks
for handler in logging.root.handlers[:]:
    logging.root.removeHandler(handler)
    
logging.basicConfig(level=logging.DEBUG, filename="log.txt")) 

rh_data = np.array([1.5, 20.4, 100.1, 76.3, 54.4])
rh_max = rh_data.max()
logging.debug(f"The maximum relative humidity was {rh_max}%")

(The for loop is needed to turn off the background logging the notebook does itself. It’s not needed in a Python script.)

Notice that we’ve used capital logging.DEBUG (which is an integer value) to set the logging level, as opposed to the logging.debug function that is used for logging a message.

By setting the logging level to “DEBUG”, our output “log.txt” file will now capture all logging information with a flag of ‘debug’ or higher - that is, all logging outputs will be written to our log file.

BASH

$ cat log.txt

OUTPUT

DEBUG:root:The maximum relative humidity was 100.1%

In the context of the plot_precipitation_climatology.py script, it would be nice to know whether or not unit conversion was performed. To do this we just need a few small changes to the script. We need to import the logging library at the top of the script,

PYTHON

import logging

and set the logging configuration and add a logging.info command in the main function.

PYTHON

def main(inargs):
    """Run the program."""
    
    logging.basicConfig(level=logging.DEBUG, filename="log.txt") 
    
    ...
    
    if input_units == 'kg m-2 s-1':
        clim = convert_pr_units(clim)
        logging.info("Units converted from kg m-2 s-1 to mm/day")
    elif input_units == "mm/day":
        pass
    else:
        raise ValueError("""Input units are not 'kg m-2 s-1' or 'mm/day'""")
    
    ...

Update your script

Update your working copy of plot_precipitation_climatology.py with the changes from this lesson.

This will mean your main function will now read as follows,

PYTHON

def main(inargs):
    """Run the program."""

    logging.basicConfig(level=logging.DEBUG, filename="log.txt") 

    ds = xr.open_dataset(inargs.pr_file)
   
    clim = ds["pr"].groupby("time.season").mean("time", keep_attrs=True)

    try:
        input_units = clim.attrs["units"]
    except KeyError:
        raise KeyError(f"Precipitation variable in {inargs.pr_file} must have a units attribute")

    if input_units == "kg m-2 s-1":
        clim = convert_pr_units(clim)
        logging.info("Units converted from kg m-2 s-1 to mm/day")
    elif input_units == "mm/day":
        pass
    else:
        raise ValueError("""Input units are not 'kg m-2 s-1' or 'mm/day'""")

    if inargs.mask:
        sftlf_file, realm = inargs.mask
        clim = apply_mask(clim, sftlf_file, realm)

    create_plot(
        clim,
        dset.attrs["source_id"],
        inargs.season,
        gridlines=inargs.gridlines,
        levels=inargs.cbar_levels
    )    
    plt.savefig(
        inargs.output_file,
        dpi=200,
        bbox_inches="tight",
        facecolor="white",
    )

and your convert_pr_units as:

PYTHON

def convert_pr_units(da):
    """Convert kg m-2 s-1 to mm day-1.
   
    Args:
      da (xarray.DataArray): Precipitation data
    
    """
    
    da.data = da.data * 86400
    da.attrs["units"] = "mm/day"
   
    assert da.data.min() >= 0.0, "There is at least one negative precipitation value"
    assert da.data.max() < 2000, "There is a precipitation value/s > 2000 mm/day"
    
    return da

Verbose reporting

Add two new command line options to plot_precipitation_climatology.py.

The first should change the logging level so reporting from the program is more verbose.

PYTHON

parser.add_argument(
    "-v",
    "--verbose",
    action="store_true",
    default=False,
    help="Change the minimum logging reporting level from WARNING (default) to INFO",
)

The second should allow the user to specify the name of the log file. (If they don’t specify a name then the logging information is printed to the screen.)

PYTHON

parser.add_argument(
    "--logfile",
    type=str,
    default=None,
    help="Name of log file (by default logging information is printed to the screen)",
)

The basic configuration command at the top of the main function (logging.basicConfig(level=logging.DEBUG, filename="log.txt")) needs to be replaced with the following:

PYTHON

log_lev = logging.INFO if inargs.verbose else logging.WARNING
logging.basicConfig(level=log_lev, filename=inargs.logfile) 

Error handling for land/ocean masks

In the previous lesson we added an apply_mask function to our script. Update the following if statement in that function so that it raises a ValueError if the realm is not ocean or land.

PYTHON

if realm == "land":
    masked_da = da.where(ds["sftlf"].data < 50)
else:
    masked_da = da.where(ds["sftlf"].data > 50)

PYTHON

if realm.lower() == 'land':
    masked_da = da.where(ds["sftlf"].data < 50)
elif realm.lower() == 'ocean':
    masked_da = da.where(ds["sftlf"].data > 50)
else:
    raise ValueError("""Mask realm is not 'ocean' or 'land'""")

plot_precipitation_climatology.py

At the conclusion of this lesson your plot_precipitation_climatology.py script should look something like the following:

PYTHON

import logging
import argparse

import xarray as xr
import cartopy.crs as ccrs
import matplotlib.pyplot as plt
import numpy as np
import cmocean


def convert_pr_units(da):
    """Convert kg m-2 s-1 to mm day-1.
    
    Args:
      da (xarray.DataArray): Precipitation data
   
    """

    da.data = da.data * 86400
    da.attrs["units"] = "mm/day"
   
    assert da.data.min() >= 0.0, "There is at least one negative precipitation value"
    assert da.data.max() < 2000, "There is a precipitation value/s > 2000 mm/day"

    return da


def apply_mask(da, sftlf_file, realm):
    """Mask ocean or land using a sftlf (land surface fraction) file.
   
    Args:
      da (xarray.DataArray): Data to mask
      sftlf_file (str): Land surface fraction file
      realm (str): Realm to mask
   
    """
  
    ds = xr.open_dataset(sftlf_file)
    if realm.lower() == "land":
        masked_da = da.where(ds["sftlf"].data < 50)
    elif realm.lower() == 'ocean':
        masked_da = da.where(ds["sftlf"].data > 50)   
    else:
        raise ValueError("""Mask realm is not 'ocean' or 'land'""")    

    return masked_da


def create_plot(clim, model, season, gridlines=False, levels=None):
    """Plot the precipitation climatology.
    
    Args:
      clim (xarray.DataArray): Precipitation climatology data
      model (str): Name of the climate model
      season (str): Season
     
    Kwargs:
      gridlines (bool): Select whether to plot gridlines
      levels (list): Tick marks on the colorbar    
    
    """

    if not levels:
        levels = np.arange(0, 13.5, 1.5)
       
    fig = plt.figure(figsize=[12,5])
    ax = fig.add_subplot(111, projection=ccrs.PlateCarree(central_longitude=180))
    clim.sel(season=season).plot.contourf(
        ax=ax,
        levels=levels,
        extend='max',
        transform=ccrs.PlateCarree(),
        cbar_kwargs={"label": clim.units},
        cmap=cmocean.cm.haline_r,
    )
    ax.coastlines()
    if gridlines:
        plt.gca().gridlines()
    
    title = f"{model} precipitation climatology ({season})"
    plt.title(title)


def main(inargs):
    """Run the program."""

    log_lev = logging.DEBUG if inargs.verbose else logging.WARNING
    logging.basicConfig(level=log_lev, filename=inargs.logfile) 

    ds = xr.open_dataset(inargs.pr_file)
    
    clim = ds['pr'].groupby("time.season").mean("time", keep_attrs=True)

    try:
        input_units = clim.attrs["units"]
    except KeyError:
        raise KeyError(f"Precipitation variable in {inargs.pr_file} does not have a units attribute")

    if input_units == "kg m-2 s-1":
        clim = convert_pr_units(clim)
        logging.info("Units converted from kg m-2 s-1 to mm/day")
    elif input_units == "mm/day":
        pass
    else:
        raise ValueError("""Input units are not 'kg m-2 s-1' or 'mm/day'""")

    if inargs.mask:
        sftlf_file, realm = inargs.mask
        clim = apply_mask(clim, sftlf_file, realm)

    create_plot(
        clim,
        ds.attrs["source_id"],
        inargs.season,
        gridlines=inargs.gridlines,
        levels=inargs.cbar_levels
    )
    plt.savefig(
        inargs.output_file,
        dpi=200,
        bbox_inches="tight",
        facecolor="white",
    )


if __name__ == '__main__':
    description='Plot the precipitation climatology for a given season.'
    parser = argparse.ArgumentParser(description=description)
   
    parser.add_argument("pr_file", type=str, help="Precipitation data file")
    parser.add_argument("season", type=str, help="Season to plot")
    parser.add_argument("output_file", type=str, help="Output file name")

    parser.add_argument(
        "--gridlines",
        action="store_true",
        default=False,
        help="Include gridlines on the plot",
    )
    parser.add_argument(
        "--cbar_levels",
        type=float,
        nargs="*",
        default=None,
        help="list of levels / tick marks to appear on the colorbar",
    )
    parser.add_argument(
        "--mask",
        type=str,
        nargs=2,
        metavar=("SFTLF_FILE", "REALM"),
        default=None,
        help="""Provide sftlf file and realm to mask ('land' or 'ocean')""",
    )
    parser.add_argument(
        "-v",
        "--verbose",
        action="store_true",
        default=False,
        help="Change the minimum logging reporting level from WARNING (default) to DEBUG",
    )
    parser.add_argument(
        "--logfile",
        type=str,
        default=None,
        help="Name of log file (by default logging information is printed to the screen)",
    )

    args = parser.parse_args()
    main(args)

Key Points

  • Program defensively, i.e., assume that errors are going to arise, and write code to detect them when they do.
  • You can raise exceptions in your own code.
  • Put try-except blocks in programs to catch and handle exceptions.
  • Put assertions in programs to check their state as they run.
  • Use a logging framework instead of print statements to report program activity.
  • The are more advanced lessons you can read to learn about code testing.